Summary: In this Pandahall tutorial, you can see a pair of easy DIY wire wrapped earrings. It’s very easy to make the earrings. Have a nice try!
Wire wrapping techniques are widely used in jewelry making. In today’s article, I’ll use wire wrapping techniques to DIY a pair of easy wire wrapped earrings. The following instructions are about making the easy wire wrapped drop earrings. Just keep reading.
Materials and tools needed in DIY the easy wire wrapped earrings:
10mm Yellow Round Rhinestone Beads
0.3mm Silver Copper Wire
Silver Jump Rings
Silver Easing Hooks
2mm Silver Aluminum Wire
Needle Nose Plier
Round Nose Plier
Instructions on how to make the easy wire wrapped earrings:
Step 1: Make the main part of the easy wire wrapped earrings
1st, cut a piece of 2mm silver aluminum wire and thread a 10mm yellow round rhinestone bead to the middle of the aluminum wire;
2nd, make several spiral circles on the two ends. Then, fold the right aluminum wire and left aluminum wire (as shown in the picture).
Step 2: Add earring hook
1st, cut a piece of 0.3mm silver copper wire. Then, wrap it around the aluminum wire and cut off the excess copper wires (as shown in the picture);
2nd, add a silver earring hook on top of the earring through a silver jump ring;
3rd, repeat the above steps to make the other pair of easy wire wrapped earrings.
Here is the final look of the easy wire wrapped earrings.
Just with the above two easy steps, you can DIY a pair of personalized wire wrapped earrings. During the wire wrapping process, please be careful of your hands. The difficulty level of this earring DIY project is extremely easy! Green hands can have a try!